Radio CD MP3 WMA
Milano MP26
Monte Carlo MP26
San Remo MP26
7 646 170 310
7 646 165 310
7 646 160 310
Bedienungsanleitung
Operating instructions
Notice d’emploi
Istruzioni d’uso
Gebruiksaanwijzing
Bruksanvisning
Instrucciones de manejo
Instruções de serviço
Betjeningsvejledning
Instrukcja obsługi
Návod k obsluze
Návod na obsluhu
Controls
1Button to switch the device on/off
;BND•TS button
and operate the volume mute feature.
Short press: Selects the FM memory
banks and the MW and LW wavebands.
Long press: Starts the Travelstore
function.
2
button
to remove the control panel (release
panel)
<AUDIO button
3Volume control
Sets bass, treble, balance and fader.
Selects an equalizer presetting.
Switching X-BASS on/off and adjusting
it.
4SRC button
Short press: Switching sources
between CD/MP3, CD changer (if con-
nected) and AUX.
Long press: Briefly displaying time.
5MENU button
Short press: Calls up the menu for
settings.
Long press: Starts the Scan function.
6CD tray
7
button
to eject the CD from the device.
8Arrow buttons
9TRAF•RDS button
Short press: Switches traffic informa-
tion standby on/off.
Long press: Switches convenient RDS
function on/off.
:Keys 1 - 6
30
Contents
Traffic announcements in CD mode .. 45
Ejecting a CD................................. 45
Notes and accessories...................... 32
Detachable control panel ................. 33
Switching on/off.............................. 34
Adjusting the volume ....................... 35
Setting the power-on volume ........... 35
Quickly reducing the volume (Mute).. 36
Switching the confirmation
beep on/off................................... 36
Muting during telephone mode ........ 36
Radio mode ..................................... 37
Adjusting the tuner......................... 37
Switching to radio mode ................. 37
Convenient RDS functions............... 37
Selecting the waveband/memory
bank ............................................ 38
Tuning into a station ....................... 38
Setting the sensitivity of station
seek tuning ................................... 38
Storing stations ............................. 39
Storing stations automatically
(Travelstore) ................................. 39
Listening to stored stations ............. 39
Scanning receivable stations (SCAN) .. 39
Setting the scanning time................ 39
Programme type (PTY) .................. 40
Optimising radio reception.............. 41
Configuring the display ................... 41
MP3/WMA mode ............................. 46
Preparing an MP3/WMA CD............. 46
Switching to MP3 mode .................. 47
Configuring the display ................... 47
Selecting a directory ...................... 48
Selecting Tracks/Files..................... 48
Fast search ................................... 48
Random track play (MIX)................. 48
Scanning tracks (SCAN).................. 49
Repeating individual tracks or whole
directories (REPEAT)...................... 49
Interrupting playback (PAUSE)......... 49
CD-changer mode ............................ 50
Switching to CD-changer mode........ 50
Selecting CDs................................ 50
Selecting tracks............................. 50
Fast searching (audible).................. 50
Configuring the display ................... 50
Repeating individual tracks or whole
CDs (REPEAT) ............................... 50
Random track play (MIX)................. 51
Scanning all tracks on all CDs (SCAN).. 51
Interrupting playback (PAUSE)......... 51
Remote control................................ 52
CLOCK time..................................... 52
Sound ............................................. 53
X-BASS ........................................... 55
Adjusting the level display................ 55
External audio sources..................... 56
Specifications ................................. 56
Traffic information........................... 42
CD mode ......................................... 43
Switching to CD mode .................... 43
Selecting tracks............................. 43
Fast track selection ........................ 43
Fast searching (audible).................. 43
Random track play (MIX)................. 44
Scanning tracks (SCAN).................. 44
Repeating tracks (REPEAT) ............. 44
Interrupting playback (PAUSE)......... 44
Configuring the display .................. 44
Displaying CD text.......................... 45
31
Notes and accessories
Notes and accessories
Road safety
Road safety has absolute priority.
Thank you for choosing a Blaupunkt product.
We hope you enjoy using this new piece
of equipment.
u
u
Only operate your car sound system if
the road and traffic conditions allow
you to do so.
Please read these operating in-
structions before using the equip-
ment for the first time.
Familiarise yourself with the device
before setting off on your journey.
The Blaupunkt editors are constantly work-
ing on making the operating instructions
clearer and easier to understand. However,
if you still have any questions on how to
operate the device, please contact your deal-
er or the telephone hotline for your country.
You will find the telephone number printed
at the back of this booklet.
You should always be able to hear police,
fire and ambulance sirens in good time
from inside your vehicle.
u
For this reason, listen to your car
sound system at a suitable volume
level during your journey.
Installation
We provide a manufacturer guarantee for
our products bought within the European
Union. You can view the guarantee condi-
directly at:
If you want to install your car sound system
yourself, please read the installation and
connection instructions that follow these
operating instructions.
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by Blau-
punkt.
D-31139 Hildesheim, Germany
Remote control
Disposal of old unit
The steering wheel and/or handheld remote
control allows you to access the most im-
portant functions of your car sound system
safely and conveniently.
(EU countries only)
Do not dispose of your old device in the
household trash!
Use the return and collection systems avail-
able to dispose of the old device.
You cannot switch the device on/off using
the remote control.
You can find out from your Blaupunkt dealer
which remote controls can be used with your
car sound system.
32
Notes and accessories
Amplifiers
You can use all Blaupunkt and Velocity am-
plifiers.
Detachable control panel
Detachable control panel
Theft protection
The device is equipped with a detach-
able control panel (flip-release panel) as a
way of protecting your equipment against
theft. The device is worthless to a thief
without this control panel.
CD changers
You can connect the following Blaupunkt CD
changers:
CDC A 08, IDC A 09 and CDC A 03.
Protect your device against theft by tak-
ing the control panel with you whenever
you leave your vehicle. Do not leave the con-
trol panel inside your vehicle - not even in
a hiding place.
The control panel has been designed to
be easy to use.
Notes:
• Never drop the control panel.
• Never expose the control panel to
direct sunlight or other heat sources.
• Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, please clean the contacts
with a lint-free cloth moistened with
cleaning alcohol.
Detaching the control panel
2
u
Press the button 2.
33
Detachable control panel
Switching on/off
The locking mechanism of the control panel
is unlocked.
Switching on/off
There are various ways of switching the
device on/off:
u
Pull the control panel straight out of
the device and to the left.
The device switches off.
Switching on/off using the vehicle
ignition
All the current settings are saved.
The device will switch on/off simultaneously
with the ignition if the device is correctly
connected to the vehicle’s ignition and you
did not switch the device off by pressing
button 1.
Any CD already inserted in the device
remains there.
Attaching the control panel
u
Push the control panel into the guides
of the device from the left to the right.
Switching on/off using button 1
u
u
Carefully push on the left side of the
control panel until it clicks into place.
To switch on the device, press button
1.
u
To switch off the device, press and hold
down button 1for longer than two sec-
onds.
The device switches off.
Note:
To protect the vehicle battery, the device
will switch off automatically after one
hour if the ignition is off.
Note:
When attaching the control panel, make
sure you do not push on the display.
Switching on with CD draw-in
If the device is switched off and no CD is
in the drive,
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activated
(radio, CD, CD changer or AUX) when the
panel is replaced.
u
gently insert the CD with its printed
side uppermost into the drive 6until
you feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive as
it draws in the CD.
The device switches on and CD playback
starts.
34
Switching on/off
Note:
Adjusting the volume
Adjusting the volume
You can adjust the volume in increments
from 0 (off) to 66 (maximum).
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch in on first with the button 1
to start the playback.
To increase the volume,
u
press the button 3.
Switching the device on/off using the
detachable control panel
To decrease the volume,
u
press the button 3.
u
Detach the control panel.
The device switches off.
Setting the power-on volume
u
Attach the control panel again.
Note:
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
The device features a time-out function
(time window).
For example, if you press the MENU
button 5and select a menu item,
the device switches back after approx.
8 seconds after the last button activation.
The settings performed are saved.
You can set the power-on volume.
u
u
Press the MENU button 5.
Press the or button 8repeat-
edly until "ON VOLUME" appears on the
display.
u
Adjust the power-on volume using the
buttons 8.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off
the device is re-enabled.
35
Adjusting the volume
Note:
Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
To protect your hearing, the power-
on volume is limited to the value "38".
If the volume before switching off was
higher and the "LAST VOL" setting
was selected, the device switches on
again with the value "38".
When you have finished making your chang-
es,
u
u
Press the MENU button 5.
u
press the MENU button 5twice.
Press the or button 8repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Quickly reducing the volume
(Mute)
u
Switch the beep on or off using the
You can quickly reduce the volume to a
preset level (Mute).
buttons 8.
When you have finished making your chang-
es,
u
Briefly press the button 1.
u
"MUTE" appears on the display.
press the MENU button 5.
Cancelling mute
To return to your previously set volume
level,
Muting during telephone mode
If your device is connected to a cell phone,
the car sound system is muted when
you "pick up" the phone. For this purpose,
the cell phone must be connected to the
device as described in the installation
instructions.
u
briefly press the button 1again.
Adjusting the mute level
You can adjust the mute level.
u
u
Press the MENU button 5.
The display shows "PHONE".
Press the or button 8repeatedly
until "MUTE LVL" appears on the dis-
play.
u
Adjust the mute level using the
buttons 8.
When you have finished making your
changes,
u
press the MENU button 5twice.
36
Radio mode
u
press the SRC button 4repeatedly
until the memory bank, e.g. "FM1", ap-
pears on the display.
Radio mode
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region
in which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
Convenient RDS functions
This device is equipped with an RDS ra-
dio receiver (Radio Data System). Many
of the receivable FM stations broadcast a
signal that not only carries the programme
but also additional information such as the
station name and programme type (PTY).
The station name appears on the display
as soon as the tuner receives it.
The radio functions described in these
operating instructions refer to the tuner
setting EUROPE.
The convenient RDS functions AF (Alterna-
tive Frequency) and REGIONAL extend your
radio’s range of functions.
u
Switch off the device by pressing button
1.
•
AF: If the RDS function is activated,
the radio automatically tunes into the
best receivable frequency for the station
that is currently set.
u
Hold the buttons 1 and 5 :pressed at
the same time and switch on the device
again with the button 1.
•
REGIONAL: At certain times, some radio
stations divide their programme into
regional programmes providing different
content. You can use the REG function
to prevent the car radio from switching
to alternative frequencies that are trans-
mitting different programme content.
"TUNER" is displayed.
u
Select your tuner region with the or
button 8.
To save the setting,
u
switch the device off and on again or wait
approx. 8 seconds. The radio starts play-
ing with the last setting selected (radio,
CD, CD changer or AUX).
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching to radio mode
If you are in CD, CD changer or AUX mode,
Switching the RDS function on/off
If you want to use the RDS functions (AF and
REGIONAL),
u
press the BND•TS ;button
or
u
press and hold down the TRAF•RDS 9
button for longer than two seconds.
37
Radio mode
The RDS function is active if the RDS symbol
appears on the display.
Tuning into stations manually
You can also tune into stations manually.
Note:
Switching REGIONAL on/off
You can only tune into stations manually
if the RDS function is deactivated.
u
u
Press the MENU button 5.
Press the or button 8repeatedly
until "REG" appears on the display. "OFF"
or "ON" is displayed alongside "REG".
u
Press the or button 8.
Browsing through broadcasting
networks (FM only)
To switch REGIONAL on/off,
If radio stations provide several programmes,
you have the option of browsing through
these so-called "broadcasting networks".
u
u
press the or button 8.
Press the MENU button 5.
Note:
Selecting the waveband/memory
bank
The RDS function must be activated be-
fore you can use this feature.
This device can receive programmes broad-
cast over the FM frequency range as well
as the MW and LW (AM) wavebands. There
are three memory banks available for the
FM waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Six stations can be stored in each memory
bank.
u
Press the or button 8to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only be
able to switch to stations that you have
received once before already. To receive
the stations, use the Scan or Travelstore
function.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
u
briefly press the BND•TS ;button.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good recep-
tion or whether it can also tune into those
with a weak reception.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
u
u
u
Press the MENU button 5.
Press the or button 8.
Press the or button 8repeatedly
until "SENS" and the currently set value
appears on the display.
The radio tunes into the next receivable
station.
"SENS HI6" means that the tuner is set to the
highestsensitivitysetting. "SENSLO1"means
it is set to the lowest sensitivity setting.
38
Radio mode
u
Set the desired sensitivity level using
the buttons 8.
Listening to stored stations
u
u
Select the memory bank or waveband.
When you have finished making your
changes,
u
Press the station button 1 - 6 :of the
desired station.
press the MENU button 5.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Storing stations
Storing stations manually
u
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Scanning begins. "SCAN" appears briefly
on the display followed by a flashing display
of the current station name or frequency.
u
u
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 6 :for longer than two sec-
onds to assign the station to that button.
Cancelling SCAN and continuing
listening to a station
Storing stations automatically
(Travelstore)
You can automatically store the six stations
offering the strongest reception in the region
(FM only). The stations are stored in the
FMT memory bank.
u
Press the MENU button 5.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
u
u
Press the MENU button 5.
Note:
Press the or button 8repeatedly
until "SCAN TIME" appears on the dis-
play.
Any stations that were previously stored
in this memory bank are deleted in the
process.
u
Set the desired scanning time using
u
Press and hold down the BND•TS ;
for longer than two seconds.
the
buttons 8.
When you have finished making your chang-
es,
The storing procedure begins. "FM TSTORE"
appears on the display. After the process has
completed, the radio will play the station that
is stored in memory location 1 of the FMT
memory bank.
u
press the MENU button 5twice.
39
Radio mode
Note:
• If you do not want this PTY EON switch-
ing, disable it in the menu with "PTY
off". First, press one of the SRC 4
or BND•TS ;buttons.
The defined scanning time is also applied
by the system to scanning carried out in
CD and CD changer mode.
Switching PTY on/off
Programme type (PTY)
u
Press the MENU button 5.
Besides transmitting the station name, some
FM stations also provide information on the
type of programme that they are broadcast-
ing. Your car radio can receive and display
this information.
u
Press the or button 8repeatedly
until "PTY ON" or "PTY OFF" appears on
the display.
u
u
Press the or button 8to switch
PTY ON or OFF.
For example, the programme types can be:
Press the MENU button 5.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
MUSIC
JAZZ
POP
Selecting the PTY language
You can select the language for the display
of the programme types. Options include
"DEUTSCH", "ENGLISH" and "FRANÇAIS".
You can use the PTY function to select sta-
tions of a particular programme type.
u
u
Press the MENU button 5.
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Press the or button 8repeatedly
until "PTY LANG" appears on the dis-
play.
u
Set the desired language using the
buttons 8.
Notes:
• If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefly on the
display. The radio will then retune to
the station that it received last.
When you have finished making your chang-
es,
u
press the MENU button 5twice.
• If the tuned radio station or another
station on the broadcasting network
broadcasts your selected programme
type at a later point in time, the radio
will automatically switch from the cur-
rently tuned station or from CD mode
or CD-changer mode to the station
whose programme type matches the
one you selected.
40
Radio mode
Selecting a programme type and
starting seek tuning
Configuring the display
In radio mode, you have the option of dis-
playing the waveband with memory bank/
location and the time or station name or
frequency of the current station.
u
Press the or button 8.
The current programme type appears on the
display.
u
If you want to select another programme
type, you can do so by pressing the or
button 8whilst this display is vis-
ible.
Select "FREQUENCY" to display the station
name or the frequency, or select "CLOCK"
to display the waveband with memory bank/
location and time.
u
u
The selected programme type appears
briefly on the display.
Press the MENU button 5.
Press the or button 8repeatedly
until "TUN DISP" appears on the dis-
play.
u
Press the or button 8to start seek
tuning.
u
u
The radio will then tune into the next sta-
tion that it finds that corresponds to your
selected programme type.
Press the or button 8to switch
between "CLOCK" and "FREQUENCY".
Press the MENU button 5twice.
Optimising radio reception
HICUT
The HICUT function improves reception
during poor radio reception (only FM). If
reception interferences are present, the
interference level is automatically reduced.
SWITCHING Hicut on/off
u
Press the MENU button 5.
u
Press the or button 8repeatedly
until "HICUT" appears on the display.
u
Press the or button 8to adjust the
HICUT setting.
"HICUT 0" means no automatic reduction of
the interference level, "HICUT 1" means au-
tomatic reduction of the interference level.
u
Press the MENU button 5.
41
Traffic information
If you hear the warning beep, you can either
switch off traffic information priority or tune
into a station that broadcasts traffic infor-
mation.
Traffic information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network.
Whenever a traffic announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffic reports to the appropriate traffic in-
formation station within the broadcasting
network that does.
Setting the volume for traffic
announcements
u
u
Press the MENU button 5.
Press the or button 8repeatedly
until "TA VOLUME" appears on the dis-
play.
Once the traffic report has been played, the
system will switch back to the programme
that you were listening to before.
u
Adjust the volume using the
8.
buttons
When you have finished making your chang-
es,
Switching traffic information
priority on/off
u
press the MENU button 5twice.
u
Briefly press the TRAF•RDS button
9.
Notes:
• Using the volume control 3, you
can also adjust the volume during
a traffic announcement for the dura-
tion of that announcement.
The priority for traffic announcements is
activated if the display shows the traffic
jam symbol.
Notes:
• The volume distribution can be ad-
justed for traffic announcements.
For further information, please read
the "Sound" chapter.
You will hear a warning beep:
• If you leave the reception area of a
traffic information station that you are
currently listening to.
• If you are receiving a traffic informa-
tion station and the volume is set to
minimum (0) or if you leave the broad-
cast area of the set traffic information
station while listening to a CD, a CD
changer or AUX and the subsequent
automatic seek tuning does not find
a new traffic information station.
• If you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
42
CD mode
Note:
CD mode
You can use this device to play standard
audio CDs, CD-Rs and CD-RWs with a dia-
meter of 12 or 8 cm.
If the vehicle ignition was switched off
prior to inserting the CD, you must switch
in on first with the button 1to start the
playback.
If a CD is already inserted in the drive,
Risk of severe damage
to the CD drive!
Contoured CDs (shape CDs) are not suit-
able for playback.
u
press the SRC button 4repeatedly
until "CD" appears on the display.
Playback begins from the point at which
it was last interrupted.
We accept no responsibility for any
damage to the CD drive that may occur
as a result of the use of unsuitable CDs.
Selecting tracks
u
Press one of the arrow buttons 8to
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-protected
CDscancauseplaybackproblems. Blaupunkt
cannot guarantee the proper functioning
of copy-protected CDs!
select the next or previous track.
If you press the or button 8once,
the player will play the current track again
from the beginning.
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music files. For further informa-
tion, please read the chapter entitled "MP3/
WMA mode".
Fast track selection
To quickly select tracks backwards or for-
wards,
u
press and hold down one of the
buttons 8until fast-reverse / fast-for-
ward track selection begins.
Switching to CD mode
If there is no CD inserted in the drive,
Fast searching (audible)
To fast search backwards or forwards,
u
gently insert the CD with its printed side
up into the CD tray 6until you feel some
resistance.
u
press and hold down one of the
buttons 8until fast searching back-
wards / forwards begins.
The drive draws in the CD automatically.
You must not assist or hinder the drive as it
draws in the CD.
The CD starts playing.
43
CD mode
Cancelling REPEAT
If you want to cancel the repeat function,
Random track play (MIX)
u
Press the 5 MIX button :.
u
press the 4 RPT button :again.
"MIX CD" appears briefly on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
"RPT OFF" appears briefly on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Cancelling MIX
u
Press the 5 MIX button :again.
Interrupting playback (PAUSE)
Press the button 3 :.
"PAUSE" appears on the display.
u
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
Cancelling pause
u
During the pause, press the button 3
:.
u
Playback is continued.
Press and hold down the MENU button
5for longer than two seconds.
Configuring the display
The next track will then be scanned.
You can select from two display types for
CD mode:
Note:
You can set the scanning time. For fur-
ther information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
•
Track number and time
•
u
u
Track number and playing time
Press the MENU button 5.
Press the or button 8repeatedly
Cancelling SCAN and continuing
listening to a track
until "CD DISP" appears on the display.
u
u
Press the or button 8to switch
between "PLAY TIME" and "CLOCK".
u
To stop scanning, press the MENU button
5.
Press the MENU button 5twice.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
u
press the 4 RPT button :.
"RPT TRCK" appears briefly on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deactivate
RPT.
44
CD mode
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist, album
and tracks.
Ejecting a CD
u
Press the
CD compartment.
button 7next to the
The CD is ejected.
You can allow the CD text to be displayed
as scrolling text every time you switch to
another track. The default display will ap-
pear again after the whole CD text has been
shown once. For further information, please
read the section entitled "Configuring the
display".
u
Remove the CD.
Notes:
• If a CD is ejected, the drive will auto-
matically draw it back in again after
approx. 10 seconds.
• You can also eject CDs whilst the
device is switched off or whilst another
audio source is activated.
Switching CD text on/off
u
Press the MENU button 5.
u
Press the or button 8repeatedly
until "CD TEXT" appears on the display.
u
Switch the CD text function on ("TEXT
ON") or off ("TEXT OFF") using the or
button 8.
When you have finished making your chang-
es,
u
press the MENU button 5twice.
Traffic announcements in CD
mode
If you wish to receive traffic announcements
in CD mode,
u
press the TRAF•RDS button 9.
The priority for traffic announcements is
activated if the display shows the traffic jam
symbol. For further information, please read
the chapter "Traffic information reception".
45
MP3/WMA mode
MP3/WMA mode
D01
You can also use this car sound system
to play CD-Rs and CD-RWs that contain
MP3 music files. You can also play WMA files.
The operation for playing MP3 and WMA files
is identical.
A
D02
D03
D04
T001
Notes:
T001
• WMA files with Digital Rights Manage-
ment (DRM) from online music shops
cannot be played with this device.
T002
T003
T004
T005
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
• WMA files can only be played back
safely if they were created with Win-
dows Media Player version 8.
B
T001
T002
T003
T004
T005
T006
Preparing an MP3/WMA CD
The various combinations of CD burners, CD
burning software and CD blanks may lead
to problems arising with the device’s ability
to play certain CDs. If problems occur with
your own burned CDs, you should try an-
other brand of CD blank or choose another
colour of CD blank.
A Directories
B Title · Files
You can name each directory using a PC. The
device is capable of displaying the directory
name. Name the directories and tracks/files
using your CD burner software. The soft-
ware’s instruction manual will provide details
on how to do this.
The format of the CD must be ISO 9660
Level 1/Level 2 or Joliet. Other formats
cannot be played reliably.
You can create a maximum of 252 directories
on a CD. You can use this device to access
all of these directories individually.
Note:
When naming directories and tracks/files
you should avoid using accents and spe-
cial characters.
Regardless of the number of directories on
the CD, the device can handle up to 999 MP3
files on a single CD, with a maximum of 255
files in one directory.
If you like your files to be in the correct order,
you should use burner software that places
files in alphanumerical order. If your software
does not provide this feature you also have
the option of sorting the files manually. For
this purpose, you must enter a number in
46
MP3/WMA mode
front of each file name, e.g. "001", "002",
etc. The leading zeros must also be en-
tered.
Configuring the display
The following settings require that an MP3
CD is in the device.
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
Configuring the default display
You can display various types of information
on the current track:
When creating (encoding) MP3 files from
audio files, you should use bit rates up to a
maximum of 256 Kbit/sec.
•
Track number and playing time "TRCK-
TIME"
•
•
Track number and time "TRCK-CLK"
This device can only play MP3 files that have
the ".MP3" file extension.
Directory number and track number
"DIR-TRCK"
Notes:
•
•
Directory number and time "DIR-CLK"
To ensure uninterrupted playback,
Directory number and playing time
"DIR-TIME"
• do not try changing the file extension
to ".MP3" of any files other than MP3
files and then attempt to play them!
The device will ignore these invalid
files during playback.
Note:
After the MP3 scrolling text was scrolled
once after a track change, the information
is permanently shown on the display.
• Do not use "mixed" CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 files dur-
ing MP3 playback).
To switch between the different display
options,
u
u
Press the MENU button 5.
Press the or button 8repeatedly
until "CD DISP" appears on the display.
• Do not use mix-mode CDs containing
both CD-audio tracks and MP3 tracks.
If you try playing a mix-mode CD, the
device will only play the CD-audio
tracks.
u
Select the desired option with the or
button 8.
When you have finished making your chang-
es,
u
Switching to MP3 mode
press the MENU button 5twice.
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
47
MP3/WMA mode
Configuring the MP3 scrolling texts
Selecting a directory
To move up or down to another directory,
One of the following scrolling texts is shown
once on the display with every track change.
Afterwards, the configured standard display
is shown.
u
press the or button 8once or
several times.
The available scrolling texts are:
Selecting Tracks/Files
to move up or down to another track/file
in the current directory,
•
•
•
•
•
Directory name ("DIR NAME")
Name of the track ("SONG NAME")
Name of the album ("ALBM NAME")
Name of the artist ("ARTIST")
File name ("FILE NAME")
u
press the or button 8once or
several times.
If you press the
button 8once, the
current track will be played again from the
beginning.
Note:
Artist, track and album name are part of
the MP3-ID tag of version 1 and can only
be displayed if they have been saved with
the MP3 files (for further information,
please read the instructions that came
with your PC’s MP3 software or burner
software).
Fast search
To fast search backwards or forwards,
u
press and hold down the or button
8until fast searching backwards / for-
wards begins.
To switch between the different display op-
tions,
Random track play (MIX)
To play the tracks in the current directory in
random order,
u
u
press the MENU button 5.
Press the or button 8repeatedly
until "MP3 DISP" appears on the dis-
play.
u
briefly press the 5 MIX button :.
"MIX DIR" appears on the display and the
MIX symbol lights up.
u
Select the desired MP3 scrolling text
with the or button 8.
To play all the tracks contained on the in-
serted MP3 CD in random order,
When you have finished making your changes,
u
press and hold down the 5 MIX button
:for longer than two seconds.
u
press the MENU button 5twice.
"MIX CD" appears on the display and the MIX
symbol lights up.
48
MP3/WMA mode
To repeat the whole directory,
Cancelling MIX
To cancel MIX,
u
press and hold down the 4 RPT button
:for longer than two seconds.
u
briefly press the 5 MIX button :.
"RPT DIR" appears briefly on the display.
"MIX OFF" appears on the display and the
MIX symbol disappears.
Cancelling REPEAT
To stop the current track or current directory
from being repeated,
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
u
briefly press the 4 RPT button :.
"RPT OFF" appears briefly on the display
and RPT disappears.
u
Press and hold down the MENU button
5for longer than two seconds. The
next track will then be scanned.
Interrupting playback (PAUSE)
"TRK SCAN" appears on the display next to
the flashing track numbers. The titles of the
CD are scanned in ascending order.
u
Press the button 3 :.
"PAUSE" appears on the display.
Note:
Cancelling pause
You can set the scanning time. For further
information on setting the scanning time,
please read the section entitled "Setting
the scanning time" in the "Radio mode"
chapter.
u
During the pause, press the button 3
:.
Playback is continued.
Cancelling SCAN and continuing
listening to a track
u
Briefly press the MENU button 5.
The currently scanned track will then con-
tinue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
To play the current track repeatedly,
u
briefly press the 4 RPT button :.
"RPT TRCK" appears briefly on the display
and RPT lights up.
49
CD-changer mode
Configuring the display
Five options are available for the display
in CD changer mode:
CD-changer mode
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
•
Track number and playing time ("TRCK-
TIME")
•
•
Track number and time ("TRCK-CLK")
CD number and track number ("CD-
TRCK")
Switching to CD-changer mode
•
•
CD number and time ("CD-CLK")
u
Press the SRC button 4repeatedly
until "CHANGER" appears on the dis-
play.
CD number and playing time ("CD-
TIME")
The device starts playing the first CD that
the CD changer detects.
u
u
Press the MENU button 5.
Press the or button 8repeatedly
until "CDC DISP" appears on the dis-
play.
Selecting CDs
To move up or down to another CD,
u
u
Press the or button 8repeatedly
until the desired option appears.
u
press the or button 8once or
several times.
Press the MENU button 5twice.
Note:
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
The device will ignore empty CD slots
in the changer and slots containing
invalid CDs.
u
briefly press the 4 RPT button :.
Selecting tracks
To move up or down to another track on
the current CD,
"RPT TRCK" appears briefly and RPT lights
up on the display.
To repeat the current CD,
u
u
press the or button 8once or
several times.
press and hold down the 4 RPT button
:for longer than two seconds.
"RPT DISC" appears briefly and RPT lights
up on the display.
Fast searching (audible)
To fast search backwards or forwards,
u
press and hold down one of the
tons 8until fast searching backwards /
but-
forwards begins.
50
CD-changer mode
Cancelling REPEAT
To stop the current track or current CD from To stop scanning,
being repeated,
Stopping SCAN
u
briefly press the MENU button 5.
u
briefly press the 4 RPT button :.
The currently scanned track will then con-
"RPT OFF" appears and RPT disappears tinue to be played normally.
on the display.
Note:
You can set the scanning time. For fur-
Random track play (MIX)
To play the tracks on the current CD in
random order,
ther information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
u
briefly press the 5 MIX button :.
Interrupting playback (PAUSE)
"MIX CD" appears briefly and MIX lights up
on the display.
u
Press the button 3 :.
To play the tracks on all inserted CDs in
random order,
"PAUSE" appears on the display.
Cancelling pause
u
press and hold down the 5 MIX button
u
During the pause, press the button 3
:.
:for longer than two seconds.
"MIX ALL" appears briefly and MIX lights
up on the display.
Playback is continued.
Cancelling MIX
u
Briefly press the 5 MIX button :.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on all
the inserted CDs in ascending order,
u
press and hold down the MENU button
5for longer than two seconds.
"TRK SCAN" appears on the display and the
number of the current track flashes.
51
Remote control
Clock time
Remote control
CLOCK time
Your car sound system is equipped with an
integrated infrared remote control receiver.
The receiver is located in the detachable
control panel.
Displaying the time
To briefly display the time,
u
press and hold the SRC button 4
until the time appears on the display.
Most of the functions can be operated con-
veniently and safely using the steering wheel
or handheld remote controls which are avail-
able as optional equipment.
Setting the time
To set the time,
You cannot switch the device on/off using
the remote control.
u
u
press the MENU button 5.
Press the or button 8repeatedly
until "CLOCK SET" appears on the dis-
play.
The section on "Remote control" in the chap-
ter "Notes and accessories" provides infor-
mation about remote controls are suitable
for your device.
u
Press the button 8.
The time appears on the display. The hours
flash and can be adjusted.
Note:
The infrared receiver included in the
remote control package only needs to
be installed according to the installation
u
Adjust the hours with the
8.
buttons
instructions if there is no direct visual Once the hours are set,
contact to the car sound system.
u
press the button 8.
The minutes flash.
u
u
Adjusts the minutes with the
tons 8.
but-
Press the MENU button 5twice.
Selecting 12/24-hour clock
mode
u
Press the MENU button 5.
The display shows "MENU".
u
Press the
or
button 8repeat-
edly until "24 H MODE" or "12 H MODE"
appears on the display.
52
Clock time
Sound
u
Press the or button 8 to switch
between the modes.
Sound
You can adjust the sound settings (bass
and treble) separately for each source (ra-
dio, CD, CD changer or AUX).
When you have finished making your chang-
es,
u
press the MENU button 5.
The volume distribution settings (balance
and fader) apply to all the audio sources
(except for traffic announcements).
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
Fader and balance can be adjusted for traffic
announcements (TA) only during a traffic
announcement.
Adjusting the bass
u
press the MENU button 5.
u
Press the AUDIO button <.
The display shows "MENU".
"BASS" appears on the display.
u
u
Press the or button 8 repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
u
Press the or button 8 to adjust
the bass.
When you have finished making your chang-
es,
Press the or button 8 to switch
the display between ON and OFF.
u
press the AUDIO button <.
When you have finished making your chang-
es,
Adjusting the treble
u
press the MENU button 5.
u
Press the AUDIO button <.
Briefly displaying time with
switched-off device
To briefly display the time when the device
is switched off,
"BASS" appears on the display.
u
u
Press the button 8 repeatedly until
"TREBLE" appears on the display.
Press the or button 8 to adjust
the treble.
u
press the SRC button 4.
The time appears on the display for approx.
8 seconds.
When you have finished making your chang-
es,
u
press the AUDIO button <.
53
Sound
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
Equalizer presettings (Presets)
This device features an equalizer in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
u
press the AUDIO button <.
To select an equalizer preset,
"BASS" appears on the display.
u
Press the AUDIO button <.
u
u
Press the button 8repeatedly until
"BAL" appears on the display.
"BASS" appears on the display.
u
u
Press the button 8repeatedly until
"POP", "ROCK", "CLASSIC" or "EQ OFF"
appears on the display.
Press the or button 8to adjust the
left/right volume distribution.
When you have finished making your chang-
es,
Press the or button 8to select
one of the presets or select "EQ OFF"
to switch off the equalizer. If you select
one of the presets, the selected preset
is permanently shown on the display.
u
press the AUDIO button <.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
When you have finished making your chang-
es,
u
press the AUDIO button <.
u
press the AUDIO button <.
"BASS" appears on the display.
u
u
Press the button 8repeatedly until
"FADER" appears on the display.
Press the or button 8to adjust
the front/rear volume distribution.
When you have finished making your chang-
es,
u
press the AUDIO button <.
54
X-Bass
Level display
X-BASS
Adjusting the level display
X-Bass allows you to increase the bass at The level display on your display briefly sym-
low volume.
bolically shows the settings process for vol-
ume and the settings of the sound control.
The selected X-Bass setting is effective for
all audio sources (radio, CD, CD changer or Aside from the settings processes, the level
AUX).
display shows the peak value for music or
language. You can switch the level display
on or off.
The X-BASS increase can be set in incre-
ments of 1 to 3.
u
Press the MENU button 5.
"XBASS OFF" means that the X-BASS func-
tion is switched off.
The display shows "MENU".
u
u
Press the or button 8repeatedly
until "PEAK LVL" appears on the dis-
play.
Adjusting the X-BASS boost
u
Press the AUDIO button <.
"BASS" appears on the display.
Press the or button 8to select
between "PEAK ON" and "PEAK OFF".
u
u
Press the button 8repeatedly until
"XBASS" appears on the display with the
current setting.
When you have finished making your chang-
es,
u
Press the or button 8repeatedly
until the desired setting appears on the
display.
press the MENU button 5twice.
When you have finished making your chang-
es,
u
press the AUDIO button <.
55
External audio sources
Specifications
External audio sources
Specifications
Instead of the CD changer, you can also
connect another external audio source
equipped with a line output. Audio sources
can, for example, be portable CD players,
MiniDisc players or MP3 players.
Amplifier
Output power:
4 x 18 watt sine
according to
DIN 45 324
at 14.4 V
4 x 45 watt max.
power
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
Tuner
Wavebands in Europe:
FM :
MW :
LW :
Note:
If no CD changer is connected, the AUX
input must be switched on in the menu.
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
Switching the AUX input on/off
Press the MENU button 5.
The display shows "MENU".
u
FM frequency response:
35 - 16,000 Hz
20 - 20,000 Hz
3 V
u
u
Press the or button 8 repeatedly
until "AUX OFF" or "AUX ON" appears
on the display.
Press the or button 8 to switch
AUX on or off.
CD
Frequency range:
When you have finished making your chang-
es,
u
Pre-amp out
4 channels:
press the MENU button 5.
Note:
If the AUX input is switched on, you
can select it by pressing the SRC
button 4. "AUX INPUT" then appears
on the display.
Input sensitivity
AUX input:
2 V / 6 kΩ
Subject to changes!
56
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio remplie !
Tenete per favore il libretto di apparecchio, debitamente riempito, in un
posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
Vänligen förvara ifyllt apparatpass på säker plats!
¡Favor guardar el documento del aparato debidamente llenado en un lugar
seguro!
Por favor, guardar o cartão preenchido do aparelho num lugar seguro!
Det udfyldte apparatpas opbevares et sikkert sted!
Prosimy przechowywać metrykę radia w bezpiecznym miejscu!
Vyplněný dokument o přístroji prosím bezpečně uschovejte!
Vyplnený dokument o prístroji prosím bezpečne uschovajte!
339
Country:
Phone:
Fax:
WWW:
Germany
Austria
(D)
(A)
(B)
0180-5000225
01-610 39 0
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
Belgium
Denmark
Finland
02-525 5444
(DK) 44 898 360
(FIN) 09-435 991
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
France
(F)
01-4010 7007
Great Britain
Greece
(GB) 01-89583 8880
(GR) 210 94 27 337
(IRL) 01-46 66 700
Ireland
Italy
(I)
(L)
02-369 62331
40 4078
Luxembourg
Netherlands
Norway
Portugal
Spain
(NL) 0800 400 1010
0800 400 1040
66-817 157
(N)
(P)
(E)
(S)
66-817 000
2185 00144
902 52 77 70
08-7501850
2185 00165
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
Sweden
Switzerland
Czech. Rep.
Hungary
Poland
(CH) 01-8471644
(CZ) 02-6130 0446
(H)
(PL)
(TR)
76 511 803
0800-118922
0212-335 06 71
022-8771260
0212-346 00 40
708-6817188
Turkey
USA
(USA) 800-950-2528
Brasil
(Mercosur)
Malaysia
(BR) 0800 7045446
+55-19 3745 2773
+604-6413 640
(Asia Pacific) (MAL) +604-6382 474
Gerätepass
Name:
Typ:
.....................................................................
7 646
....................................................................
Serien-Nr:
BP ................................................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
03/06 - CM-AS/SCS1
(dt, gb, fr, it, nl, sw, es, pt, dk, pl, cz, sk)
8622404824
|